Log In|   
View Stain and Finishing Options
Dealer Resources
View Product Catalog
Policies / Warranty

“Radford Cabinets decided to try the Cutting Edge veneer raised panels in our custom cabinet doors to increase our door production and solve our solid wood raised panel shrinkage problem. This new panel process is working well with our state-of-the-art Flat Line Finishing System and the “veneer” paneled door has enabled us to deliver an improved superior product faster to our customers. Our partnership with the Cutting Edge has been very beneficial”.
Steve Radford
RADFORD CABINETS

View More Testimonials

Ordering Terminology


Cabinet Graphic

The speed and accuracy of order processing is enhanced when using our terminology and order forms.

  • We record all sizes doors and drawer fronts by width x height
    S = Single door
    DF = Drawer front
    GL = Glass
    PR = Pair
  • All prices are calculated per sq. ft. to the nearest hundredth of an inch. When custom option charges apply please contact order desk.
  • All doors and drawer fronts are subject to a price change without notice.
  • The ability to rush orders will be confirmed by The Cutting Edge order desk and confirmed on the quote. Standard (3) day lead time for most rush orders. A rush charge will apply.
  • All doors and drawer fronts are manufactured to "finish door sizes". "finish door size" definition is: the size you order is the size we will manufacture. We require you to calculate any opening and supply us with a "finish door size". Please consider your choice of hinge and face frame limitations.
  • Pairs: we will manufacture [2] doors from the size supplied by you. For example: you order [1] pair at 36" wide you will receive [2] doors at 18" wide.
  • The Cutting Edge manufactures doors that are 13 / 16" thick standard.
  • Doors over 48" high will require a horizontal midrail unless you specify otherwise. Special placement rails are calculated at plus 25%. There is no guaranty when the midrail is excluded. All mitered doors over 48" are not guaranteed.
  • Glass doors are routed to accept 1/8" glass single pane. We have an option of plastic stripping or wood stops (available in most wood species) to secure the glass.
  • French lite glass doors come standard as pictured for single pane glass. Special mullion placement is available for an additional cost.
  • Additional lites are available at a per lite charge. Contact order desk to confirm.
  • French lite glass doors are available with mullions ie-11 profile and with the Arts and Craft series.
  • All doors can be cut for glass unless otherwise noted.
  • All doors and drawer fronts are manufactured to the nearest 1/16". Exact sizing is available for an additional charge of 20%.
  • Double arched doors [ arch on bottom rail ] options are available for additional charge of 20%.
  • "Recessed panel" door means the door has an approx. 5.2mm" veneered mdf panel.
  • There is no minimum quantity for an order however there is a set up charge for orders of 3 items or less.
  • Boring for hinges is available upon request. The Cutting Edge standard is 1/2" depth, 35mm dia. Bore at a distance of 3" on center from top & bottom of the door. For doors that are over 60'' we would require placement of a 3rd hole half the distance from the top of the door.
  • We offer a screw in or a push in, full overlay self closing blum hinge and standard plate.
  • Additional time may be required for orders containing applied moulding doors, arts & craft doors, specialty doors, doors requiring modifications or doors requiring finishing /or glazing.
  • Select material means that every effort to minimize the natural characteristics [ pin knots, pitch pockets and mineral streaks ] they are a natural occurrence in the wood and shall not be considered a defect.
  • Paint grade material is a material used without regard to color match and all natural mineral streaks are acceptable. Sound natural and putty filled defects are acceptable for paint grade.
  • The Cutting Edge standard for paint grade uses an mdf panel/maple frame.
  • Any natural wood means that there will be some color variation, mineral streaks, small tight knots, random grain with sap and heartwood.
  • Some woods such as cherry, jatoba, etc. will naturally darken sometimes drastically when exposed to sunlight or even natural light. This may be enhanced when finished and is not considered a manufacturing defect.
  • Extra sanding may be required when applying dark stains and glazes to ensure an even finish.
  • It may be necessary to use a pre-sealer on some woods especially when using medium to dark stains.
  • When ordering finishing please refer to page 2 of the current order form.
  • All finishing is a spray on stain with pre-cat lacquer. Standard colors are available for your review in our Online Design Catalog and in our Downloadable Catalog. Glazing is an option that is also available.